2008 Audi A4
Mileage
166,008
Service Date
1/15/2021
Services Performed
- Additional labor for complications to the camber adjuster on the passenger side rear
- Disassemble as necessary to remove and replace drivers side upper forward most control arm
- NOTE: During the alignment process, the nut that secures the bolt for the camber adjustment (on the passenger side rear upper control arm) was rusted in place so badly that the bolt broke. All attempts to remove the remainder of the bolt were unsuccessful because the bolt is severely rusted into the outer mounting bushing of the control arm. Inspection revealed that the mounting bolt for inner mounting bushing was also severely rusted and not in a location that could be easily (or safely) heated by a torch. This prevented the control arm from being easily removed for replacement. For these reasons, the bolt for the camber adjuster was welded into place and the alignment of the rear of the vehicle was not able to be performed
Augustus A. gave our service a 5 star review on 1/15/2021